Bottled Water Facts |
|
...............................................
Water is classified as "bottled water" or "drinking water" when it meets all applicable federal and state standards, is sealed in a sanitary container and is sold for human consumption. By law, FDA standards for bottled water must be at least as stringent and protective of public health as standards set by the U.S. Environmental Protection Agency (EPA) for public water systems. Some beverages containing certain ingredients or additives may cause that product to be classified as a soft drink, dietary supplement or some other categorization. Soda water, seltzer water and tonic water are not considered bottled waters. They are regulated differently, may contain sugar and calories and are classified as soft drinks. ...............................................
Spring Water is bottled water derived from an underground formation from which water flows naturally to the surface of the earth. Spring water must be collected only at the spring or through a borehole tapping the underground formation feeding the spring. Spring water collected with the use of an external force must be from the same underground stratum as the spring and must have all the physical properties before treatment, and be of the same composition and quality as the water that flows naturally to the surface of the earth. Purified Water is water that has been produced by distillation, deionization, reverse osmosis or other suitable processes while meeting the definition of purified water in the United States Pharmacopoeia may be labeled as purified bottled water. Other suitable product names for bottled water treated by one of the above processes may include "distilled water" if it is produced by distillation, deionized water" if it is produced by deionization or "reverse osmosis water" if the process used is reverse osmosis. Alternatively, "___ drinking water" can be used with the blank being filled in with one of the terms defined in this paragraph (e.g., "purified drinking water" or "distilled drinking water"). Mineral Water is bottled water containing not less than 250 parts per million total dissolved solids may be labeled as mineral water. Mineral water is distinguished from other types of bottled water by its constant level and relative proportions of mineral and trace elements at the point of emergence from the source. No minerals can be added to this product. Sparkling Bottled Water is water that after treatment, and possible replacement with carbon dioxide, contains the same amount of carbon dioxide that it had as it emerged from the source. Sparkling bottled waters may be labeled as "sparkling drinking water," "sparkling mineral water," "sparkling spring water," etc. Artesian Water/Artesian Well Water is bottled water from a well that taps a confined aquifer (a water-bearing underground layer of rock or sand) in which the water level stands at some height above the top of the aquifer. Well Water is bottled water from a hole bored, drilled or otherwise constructed in the ground, which taps the water aquifer. |
...............................................
...............................................
In addition, members of the IBWA abide by the IBWA Model Code, which includes a voluntary system called HACCP (Hazard Analysis and Critical Control Points). This system was developed by FDA and the U.S. Department of Agriculture (USDA) and adopted by IBWA as a science-based approach to helping ensure safety in every step of the bottled water process. >Taste is another reason consumers choose bottled water. Chlorine is most often used to disinfect tap water and can leave an aftertaste. Some bottlers use ozonation, a form of supercharged oxygen and/or ultraviolet light as the final disinfecting agent, neither of which leaves an aftertaste. Bottled water provides consumers with consistent safety, high quality, good taste and convenient portability.To help ensure that bottled water is safe and of the highest quality possible, all IBWA members use one or more of the following steps found in a multi-barrier approach: source protection and monitoring, reverse osmosis, distillation, filtration, ozonation and disinfection. ...............................................
According to FDA bottled water GMPs, bottled water companies are required to use approved sources. There are two types of sources from which bottled water can be drawn: The first consists of natural sources (e.g., springs and artesian wells). By law, these sources must be protected from surface intrusion and other environmental influences. This requirement helps ensure that surface water contaminants such as Cryptosporidium and Giardia are not present. The second source of bottled water consists approved potable municipal supplies. Bottled water companies that use these sources typically reprocess this water using methods such as distillation, reverse osmosis, ozonation, deionization and filtration. This ensures that the finished product is very different-in composition and taste-from the original source water. All IBWA member companies that us municipal supplies are required by the IBWA Model Code to employ as a safeguard at least one of three processing methods recommended by the Centers for Disease Control and Prevention for effective removal of microbial (surface water) contaminants, including Cryptosporidium. These processing methods are reverse osmosis, filtration and distillation. Ozonation and ultraviolet light may also be effective treatments for Cryptosporidium inactivation. |
...............................................
FDA regulations, coupled with state and industry standards, offer consumers assurance that the bottled water they purchase is stringently regulated and tested, and is of the highest quality. IBWA has been a long-standing proponent of sensible regulations for bottled water that help to further ensure safety and protect consumers. IBWA is active at all levels of local, state and federal government, assisting in the development of such regulations, where they help enhance public safety and product quality. ...............................................
...............................................
...............................................
...............................................
...............................................
...............................................
|